Skip to Main Content

Take a minute to register your warranty

We go beyond excellence, to give you the certainty that your surface
remains safe, durable, and timelessly beautiful.

Register for complete peace of mind

Register your warranty and benefit from our commitment to high quality, reliable surfaces that you can rely on for many years to come.

Receive your free cleaning kit

We will send you a complementary cleaning kit​ once you complete your registration

Register Warranty

Read the Caesarstone® warranty terms below​

Mineral Surface

410_Aluminous_

Porcelain Surface

Cleaning counter with disinfecting wipe

Get simple care and maintenance tips

Keep your surface beautiful, it’s low maintenance, easy to clean, and highly durable.

Care & Maintenance

Warranty FAQ

Cracking is generally not covered under the Caesarstone® Lifetime Warranty​ as it typically occurs due to a fabrication or installation error, or as the result of mechanical stress and does not represent a fault in the Caesarstone® product itself.

If a crack does occur, please contact the kitchen company or stonemason who installed your bench top as they will be able to provide further assistance.

External factors which can contribute to cracking include:

  • Inadequate underbench support
  • Incorrect placement of cutouts and joins
  • Lack of consideration for thermal expansion, thermal shock or excessive heat
  • A severe impact

In the unlikely event that you damage your Caesarstone®, please take note of the batch numbers of authenticity located on the underside of your material, and contact us on 1300 119 119 or contact us online.

Depending on the damage, one of our experienced technical representatives will be able to advise you of your options and possible solutions.

While Caesarstone® is a very robust surface to begin with - stronger than both marble and granite in fact - there are simple measures you can take to ensure chipping doesn't occur.

  • Sharp non-radiused edge profiles should never be used. Caesarstone® recommends a minimum radius of at least 3-4mm on any edge profile. The larger the radius, the more resistance the edge will have to impact.
  • If the benchtop incorporates an undermount sink, then the top edge of Caesarstone® sink cut out must be a minimum radius of 6mm to minimise risk of chipping should a heavy pot hit this edge.
  • Ensure cupboards and drawers are installed correctly and don't make contact with the Caesarstone® surface when opening and closing.
  • Take care to not drop heavy items onto a Caesarstone® benchtop.

Caesarstone Mineral™ surfaces can be easily repaired. Please visit Repair a Chip for a referral to your nearest recommended service provider.